Start
Company
Service
Tools
Download
Imprint
AGB
Contact
Sitemap
Newscompany holidaysCareers
Tribological Polymer SolutionsHigh performance plasticsSelection of materialsZX-100 FamilyZX-324 FamilyZX-410 FamilyBase Type ZX-410Modified ZX-410V7T
ZX-530 FamilyZX-550 FamilyZX-750 Family
Tribological Polymer PartsPrecision bearingsDriving elementsSlidewaysCustomer specific parts
Tribological Part ProductionMachiningInjection moldingOther production methods
Polymer Testing and EvolutionPolymer TestingCompound development
Polymer Parts DesignCustomer ServiceCalculation and Design
 » 
Tribological Polymer Solutions
 » 
ZX-410 Family
 » 
Base Type ZX-410

ZX-410 Family

Base type ZX-410



Low cost, stiff, precise up to 180 °C
ZX-410 is a plain bearing material with excellent technical properties and an extremely favourable price/performance ratio. ZX-410 is a thermoplastic compound with the following specific characteristics.

Characteristics
  • Up to 180 °C hard, stiff, tough

  • Mechanical properties, wear and PV-value better than the PEEK´s ones

  • High dimensional stability

  • High chemical resistance

  • High hydrolysis resistance, except with basic substances

  • Very high UV and y radiation resistance

  • Fame resistant (low toxicity of flue gases)

  • Resistance to stress cracking

  • Good machinability

  • Cheaper than PEEK


Resistance
  • UV-radiation: (1000 hours Xenon DIN 53597) Tensile strength: –43%

  • Gamma-radiation: Limit absorbed dose 9000 kGy

  • Chemicals, resistant: Mineral acids, salt solutions, aqueous alkali pH< 9, alcohols, ethers, sulfuric acid 50 %

  • Chemicals, unstable: Ketones, chloroform, MEK, ethyl acetate, methylene dichloride, trichloroethane, hydraulic oil, dichloromethane

  • Lubricants and fuels: limited resistance

  • Water: max. water absorption: 0,6 %, dimensional changes: 0,25 %, Up to 125 °C resistant

  • Fire behavior: oxygen index (LOI): 47 %, classification: V-0 (UL94), low flue gas emission


Operational parameters*
  • Temperature (T): –70°C to +180°C (+200°C)

  • Surface pressure (p): Max. 48 (142) MPa

  • Sliding speed (v): Max. 100 m/min

  • Fatigue (S): tensile fatigue strength at 20°C
    and 1E06 stress cycles, 1 Hz = 33 MPa
    Impacts, vibrations, edge loading, gamma rays in hot and cold water.

    (*Values in the brackets, are valid for shot-term service)


The Values for Friction, wear, etc. you will find in our ZEDEX-Tools
« Back to Overview
ZX-410 Family

Substitution examples »
Compared to standard solutions

Examples of usage »
Successful plastic components

Form of delivery »
Plastic granules, Semi-finished products, Cut Outs

ZX-410 Datasheet
Here you will find all information about mechanical, thermal, electrical, and tribological characteristics.

Download here! (142 KB)